Search

UDACT-300A DIGITAL ALARM COMMUNICATOR TRANSMITTER

The UDACT-300A Digital Alarm Communicator Transmitter/Dialer Module allows Fire Alarm Control Panels to transmit Alarm, Supervisory and Trouble information on two telephone lines to a monitoring facility

The UDACT-300A Digital Alarm Communicator Transmitter/Dialer Module allows Fire Alarm Control Panels to transmit Alarm, Supervisory and Trouble information on two telephone lines to a monitoring facility.

The UDACT-300A is powered by the host fire alarm control panel and communicates with the fire alarm control panel via an RS-485 data link. The Digital Communicator can be programmed for dual line operation and uses the Security Industry Association (SIA) and Ademco Contact ID reporting protocols.

The UDACT-300A Digital Alarm Communicator Transmitter/Dialer Module can be configured locally via the on-board keypad and the CFG-300 Configuration Tool or with a UIMA programming tool and a computer with an available serial or USB port. In addition, the UDACT300A can be remotely configured using a personal computer with a modem.

The UDACT-300A can be configured for either DACT or UDACT operation. In DACT mode the Digital Communicator reports a common alarm, trouble and supervisory information. In UDACT mode the Digital Communicator reports point specific information.

Features
• Programmed to use the Ademco Contact ID and SIA-DCS reporting protocols
• Can be configured for DACT or UDACT mode of operation
• DACT mode transmits a common Alarm, Supervisory, Waterflow and Trouble information
• UDACT mode transmits point-specific Alarm, Supervisory, Waterflow, and Trouble information
• UDACT-300A has the ability to disconnect the incoming and outgoing calls and capturing the line for transmission to the Digital Alarm Communicator Receiver (DACR)
• Onsite or remote programming
• Remotely configurable via a Personal Computer with a modem (Configuration is passcode protected)
• Provides telephone line monitoring and reports status via LED indication on-board
• Provides event logs of 500 entries each to save events from local dialer or remote fire alarm panel
• Logs can be reviewed locally with the CFG-300 Configuration Tool or remotely via modem
• Continuously supervises the status of each of two connected telephone lines at approximately one minute intervals

 

Datasheets (Cutsheets)

Welcome to Secutron

Please choose your region.

Welcome to Secutron

Please choose your region.