The ALCN-240ISO Single Loop Adder is a component of the MMX-4000 system that allows one SLC loop consisting of MRI-4000 series devices to be added to the project.
The ALCN-240ISO connects on the internal bus and mounts within the main panel enclosure. Power is provided by the MMX-4000 main board.
The SLCs may be configured for Class A or Class B wiring without the need for any additional modules.
• ALCN-240ISO allows for one (1) SLC of MRI-4000 series devices to be connected to the MMX-4000 panel.
• Any combination of up to 240 MRI-4000 series physical devices can be connected on the SLC.
• One (1) ALCN-240ISO can connect on each MMX-4000 panel.
AGENCY LISTINGS
NOTES
All circuits are power limited and must use type FPL, FPLR, or FPLP power-limited cable.
For more information, refer to wiring instructions in the Network Fire Alarm Manual LT-894. Wiring is identical to that provided for ALCN-960MISO/ALCN-960D.
Mircom Training
https://mircom.com/technical-support/mircom-training/
Where to buy
https://mircom.com/where-to-buy/
Contact Us
https://mircom.com/contact/
English 
French 
